Lot 5387 - Artefacts

Designer: Frederic Boucher
Maker: Eric Fuller

Tray: 10x10x2cm

Notes: Place the seven pieces flat into the tray; also place the metal piece verically at the center of the tray and then fit the wood pieces flat into the tray. Made from walnut, Baltic birch, chechen, maple, and a steel dowel. Bottom of tray signed and dated 10/16. Limited edition of 48. Includes original solution sheet and orange storage bag. See detailed description at cubicdissection.com.

Lot 5388 - Marble Cake Plus

Designer: Frederic Boucher
Maker: Eric Fuller

Size: 9x9x4cm

Notes: Pack the seven pieces into the box, using the top and side holes. Made from padauk and cherry. One piece signed and 2/18. Limited edition of 44. Includes original information sheet and orange storage bag. See detailed description at cubicdissection.com.

Lot 5428 - B-Box and Reactor

Designer: Goh Pit Khiam and Eric Fuller
Maker: Eric Fuller

Stick length: 9.5cm

Notes: This is a joint effort between Goh Pit Khiam and Eric Fuller. Pit designed the burr frame with recursive patterns, and Eric designed the trick-opening box waiting for you inside. Made from maple, walnut, mahogany, and paduak. Reactor core and one panel signed and dated 8/16. Limited edition of 88. See detailed description at cubicdissection.com.

Lot 5429 - Hidden Pentominoes

Designer: Tamás Vanyó
Maker: Eric Fuller

Size: 17x15x3cm

Notes: Frame appears to hold four large pentomino pieces, but also internally hides a full set of 12 pentomino pieces. Both large and small pieces must slide for all to be released from the frame. Made from walnut, maple, and camaru. Limited edition of 32. See detailed description at cubicdissection.com.

Lot 5430 - Simultaneous Maze

Designer: William Hu
Maker: Eric Fuller

Size: 10x8x3cm

Notes: Remove the acrylic panel maze by movement of the three sliders. Made from jatoba and maple woods. Limited edition of 42. See detailed description at cubicdissection.com.

Lot 5431 - Noncsi Puzzle

Designer: Tamas Vanyo
Maker: Eric Fuller

Size: 9x9x5cm

Notes: Slide and remove all the pieces. Made from ash and bubbinga. Frame signed and dated 8/13. Limited edition of 44. Includes canvas storage bag. See detailed description at cubicdissection.com.

Lot 5432 - Quo Vadis

Designer: Stephan Baumegger
Maker: Eric Fuller

Size: 8x6x6cm

Notes: Move the ball through a hidden/changing maze (the central column moves up and down). Made from purpleheart and maple. Box signed and dated 6/16. Limited edition of 47. See detailed description at cubicdissection.com.

Lot 5433 - Babel

Designer: Alfons Eyckmans
Maker: Eric Fuller

Size: 9x6x6cm

Notes: Four pieces inside a tower cage with cross pieces. Made from walnut and padauk. One piece signed and dated 5/16. Limited edition of 47. See detailed description at cubicdissection.com.

Lot 5434 - Grip

Designer: Tim Alkema
Maker: Eric Fuller

Edge: 7.5cm

Notes: Goal is to release the central block, which is locked by two little cubes which have to navigate an intenal maze. Made from mahogany and ash. One piece signed and dated 5/16. Limited edition of 48. See detailed description at cubicdissection.com.

Lot 5435 - Pox Box

Designer: Yavuz Demirhan
Maker: Eric Fuller

Size: 7x7x7cm

Notes: Remove the four pieces from the box. Made from sapele, and birdseye maple. One piece signed and dated 9/17. Limited edition of 45. Includes original orange box. See detailed description at cubicdissection.com.

Lot 5437 - Cubic Burr

Designer: Tom Jolly
Maker: Eric Fuller

Edge: 7.5cm

Notes: seven pieces; perfect fit. Made from sapele and Carolina ash. One piece signed and dated 4/16. Limited edition of 47. See detailed description at cubicdissection.com.

Lot 5438 - Half Lid Box

Designer: Hajime Katsumoto
Maker: Eric Fuller

Size: 7x7x5cm

Notes: Five pieces completely fill the box, with the sliding lid. Made from sepele, yellowheart, and birds eye maple. Base signed and dated 6/18. Limited edition of 48. Includes original orange box. See detailed description at cubicdissection.com.

Lot 5439 - Decoy

Designer: Stewart Coffin
Maker: Eric Fuller

Size: 10x10x2cm

Notes: This is Coffin design #187-A. Remove the six pieces from the covered tray. Three are easy; three not so much. Made from ebony, canarywood, and sapele. Tray signed and dated 5/13. Limited edition of 42. See detailed description at cubicdissection.com.

Lot 5440 - Coniburr

Designer: Tim Alkema
Maker: Eric Fuller

Size: 8x8x6cm

Notes: Disassemble and reassemble the frame and burr pieces. Made from ash and padauk. One piece signed and dated; limited edition of 40. Includes original orange storage bag. See detailed description at cubicdissection.com.

Lot 5441 - Chinese Knot

Designer: Christoph Lohe
Maker: Eric Fuller

Stick length: 7.5cm

Notes: 6-piece burr, pieces with end-caps. Made from ash, sapele, and yellowheart. One piece signed and dated 2/18. Limited edition of 42. Includes original orange storage box. See detailed description at cubicdissection.com.

Lot 5442 - Compressed

Designer: Gregory Benedetti
Maker: Eric Fuller

Stick length: 7.5cm

Notes: Two sets of three identical pieces form a burr with two difference coordinate motions; both assembly and disassembly are a challenge. Made from maple. One piece signed and dated 12/15. See detailed description at cubicdissection.com.

Lot 5443 - Transfer

Designer: Gregory Benedetti
Maker: Eric Fuller

Stick length: 7.5cm

Notes: Two sets of three identical pieces form a burr with unusual coordinate motion. Made from Honduran mahogany. One piece signed and dated 2/16. Limited edition of 52. See detailed description at cubicdissection.com.

Lot 5444 - Camouflaged Burr

Designer: Emil Askerli
Maker: Eric Fuller

Stick length: 7cm

Notes: Six-piece burr, but the coloring indicates something isn't quite normal. Made from cherry and walnut. One piece signed and dated 6/16. Limited edition of 43. See detailed description at cubicdissection.com.